Home > Products > Composite Products > Grating Systems Moulded & Pultruded > GRP Fibreglass Moulded Grating - Conductive Top & Translucent Type
MOULDED: GRP FIBREGLASS MOULDED GRATING - CONDUCTIVE TOP & TRANSLUCENT TYPES
INFO or ORDER? We’re ready to help:
T: 01757 212744 | E: info@evergrip.com
Click here for Skype callsProduct Overview
Product name:
Moulded Conductive / Translucent Types
Manufactured from:
Fibreglass rovings combined with a
choice of thermosetting resins.
Sizes available:
- Lengths: 2007mm - 4047mm
- Widths: 995mm - 1525mm
- Thicknesses: 15mm | 25mm |
30mm | 38mm | 40mm | 50mm |
63mm
Custom options:
- Smaller than mould sizes
- Cut to preferred size/shapes
- Waterjet cutting service available
- Conductive top type
- Transluscent type
- Solid top surface type
- Hidden fixing system
- Pedestal support system, for
raised/access platforms
Colour range:
- Dependent on resin type
- Standard: Grey (Type-O), Green
(Type-I), Orange (Type-V), Red
(Type-P) - Bespoke: Any RAL colour
(minimum order quantity may
apply).
Applications, environments
and traffic:
- Load or non-load bearing surfaces
- Platforms, decks stairs &
walkways. Gulley & access covers,
litter guards, infill panels etc. - Reduced slip hazards from gritted
top surfaces - Internal / external environments
- Pedestrian, vehicular
Can be fixed to:
Concrete, steel, wood
Fixing Method:
Full range of specialist fasteners
Benefits of GRP Moulded Conductive / Translucent Types Grating include:
- Cost effective replacement for metal gratings
- Long lasting & durable
- Little or no maintenance requirement
- Suitable for all environments, exterior or interior
- Fire retardant: tested to ASTM E84 & D635
- Corrosion & chemical resistant (full details available)
- Impact resistant
- Relative light weight makes for easy transport & handling
- Rapid & easy installation: wide choice of fasteners to suit all on-site conditions
- Low electrical conductivity (high for conductive top grating)
- Full range of RAL & BS colours available to order*
- Easily cleanable
- Factory order only with realistic lead times*
- Free cutting service*
*subject to order type & size
Colours:
White
Light Grey
Yellow
Orange (Type V)
Red (Type P)
Dark Grey (Type O)
Green (Type I)
Blue
Stocked Colours:
To special order only
To Order:
Other resin types
All resin types are available in any RAL colour*
Dimensions:
Panel height range:
15 mm | 25 mm | 30 mm | 38 mm | 40 mm
Panel dimensions:
lengths from 2007 mm to 4047 mm
widths from 995 mm to 1247 mm
Custom sizes to order
Additional Options:
Resin finished highlighted edges
Choice of colour*
Water jet cutting of intricate & unusual shapes e.g. removable sections for maintenance
Cut to size prior to delivery
Full range of fasteners
*Note: not all resin types, colours & panel sizes are held in UK stock. For non-stock items a minimum order quantity may apply. Please contact us for further information on stock levels & lead times.
Applications for GRP Moulded Conductive / Translucent Grating include:
- Platforms
- Walkways
- Bridges
- Stair treads
Manufactured by a process of moulding, a combination of fibreglass rovings with
thermosetting resin forms an extremely strong, one piece, open mesh panel.
These two complimentary materials give GRP gratings excellent compressive and tensile strength. Gratings are
designed to withstand the harshest of industrial & commercial environments and require little or no maintenance.
Suitable for both interior or exterior use, a choice of resin type offers proven resistance to the effects of chemical
corrosion and UV light degradation along with fire retardant properties.
The innovative use of resin types in the manufacture of composites can lend special properties to the finished product.
Conductive top grating
Specially formulated with a carbon black surface to eliminate hazardous static electricity build up when electrically
grounded. Available with all resin types and used in a variety of industries: electronics, petrochemical, munitions
manufacturing plants/arsenals, other spark-sensitive environments and workplaces zoned under DSEAR 2002. The
product is also employed where equipment could be damaged due to static electricity discharge. The grating has a
maximum electrical resistance of 26 kilo-ohms per 300mm.
Translucent grating
The use of clear resin types during manufacture offers a degree of translucence to a finished product and an overall
appealing aesthetic, which is not normally identified with an industrial grating. These gratings are worthy of
consideration when incorporating into architect designed spaces and have a pleasing tint of colour.
The relative light weight of the product makes transport, handling & installation far easier than metallic gratings.
Panels may be cut to size before delivery to site for immediate installation, or cut in-situ using diamond tipped tooling
and resealed using approved resin top coat.
Both these product types are available to order from the factory.
Resin Types:
TYPE | RESIN BASE | CHARACTERISTICS | APPLICATIONS |
O | Orthophthalic Polyester | Std: Dark grey colour Moderate corrosion resistance Fire retardant ASTM E84 Class 1 Flame spread index 25 or less Operating temperature -50?-100?C |
Water/wastewater or air-conditioning. Light industrial applications. Wave zone areas of offshore platforms |
I | Isophthalic Polyester | Std: Green colour Industrial grade corrosion resistance Fire retardant ASTM E84 Class 1 Flame spread index 15 or less Operating temperature -50?-105?C |
Environments with mid concentrations of inorganic acids & alkalis |
F | Food Grade Polyester | Industrial grade corrosion resistance Fire retardant ASTM E84 Class 1 Flame spread index 15 or less Operating temperature -50?-105?C |
Used in food processing plants or drinking water plants |
V | Vinylester | Std: Orange colour Superior corrosion resistance Fire retardant ASTM E84 Class 1 Flame spread index 25 or less Operating temperature -50?-110?C |
Highly corrosive environments |
HV | High Flame Resistant Vinylester | Superior corrosion resistance Fire retardant ASTM E84 Class 1 Flame spread index 10 or less Operating temperature -50?-110?C ABS (American Bureau of Shipping) approved |
Highly corrosive environments where a higher flame resistance is specified |
P | Phenolic | Std: Red colour Low smoke and superior fire resistance Fire retardant ASTM E84 Class 1 Flame spread index 5 or less Operating temperature -50?-180?C |
Where fire resistance, low smoke and low toxic fumes are critical e.g. underground |
Can be fixed to or supported on:
Concrete, metal, wood, ceramics
Fixing methods:
Stainless steel bolts and m-clip fixings (to order), surface mounted disc or square plates, sub-panel connector brackets
Share this page
Terms & Conditions | Privacy Policy